Environmental friendly Low-temperature Rubber AC Foaming Agent

Product Introduction

This series of foaming agents is widely used in the foaming of natural-rubber, synthetic rubber, PVC+NBR blending and other materials. It is particularly suitable to the hot-pressing molding of rubber.

Characteristics

High Whiteness of products

Stable foaming ratio

Excellent mechanical performance of final products

Application

Low temperature AC-L is a new environment friendly foaming agent, no formaldehyde produced after decomposing, which meets the environmental protection standard of Europe and America.

The product will have fine cellular structure by using this series foaming agent. The outstanding feature is that the products with better cellular to meet the environmental requirements.

It is suggested that this series of foaming agent should be used in lower mixed temperature and general sulfuration condition to avoid the uneven cellular, coarse cellular or other problems because of premature foamed.

Technical Index

Item No.:                                              AC-L

Chemical component:                          Azodicarbonamide

Appearance:                                         Light yellow powder

Gas Volume ml/g (STP):                    160±3

Decomposing Temperature (°C):       138±2

Particle size (μm):                              6~8

PH:                                                       7.0~7.5

Moisture:                                              ≤0.3%

Package and Storage

It is odorless and non-toxic, with good storage stability, won’t decompose under common temperature but should be stored in a cool and dry place, away from hot steam pipeline, fire source and direct sunlight. Never let it contact directly with acids and alkalis. It is suggested that good ventilation conditions should be realized where the foaming agent is treated and mixed. Be careful not to inhale its powder, make frequent skin contact or swallow it. This agent is easily moisture absorb, please pay attention to its damp proof.

Each 25kg is packed in international standard corrugated paper carton with a polythene liner inside.

Each batch weighs 3 Tons. While using the foaming agent of same batch, only a small quantity is needed to test for confirmation and then the whole batch can be used with certainty.